Touch Videowalls

The ultimate solution for a stunning interactive appearance

Contact us

Touch Videowalls

The ultimate solution for a stunning interactive appearance

Contact us

Product information

Versatile

Any wall, whether LED wall, LCD wall, monitor wall, with touch – just as you wish

New standards

Huge, up to 4m high, interactive surfaces for new possibilities

Accurate

High-precision multi-touch surfaces for natural interaction

Customized

Customized solutions for your needs

Varianten

We offer videowalls with touch with the following equipment

Touch kit with protective glass and glass holders

Optionally, we offer a touch kit, glued onto protective glass including glass holders.

Touch kit without glass and frame

Our standard solution consists of the touch kit without glass and frame construction. The kit consists of several individual sensor bars, which can be joined together and fixed on any surface (for example on a glass pane).

4-/2-sided Touch kit

You can also reduce our kits from four to two bars, where the kits are positioned either above and below the imaging source or to the right and left of it. However, the touch bars must not exceed a maximum distance of 4 m from each other.

To implement a nearly frameless installation, the two-sided kits can also be embedded in floor and ceiling or in opposite walls. However, these slots must remain open so that the touch kits are still able to transmit.

Available with 2, 6, 10, 32 or 40 touch pointsFor videowalls up to a height of 4 m and almost unlimited width
Infrared sensorsEasy installation
Up to 120″ HID capableHigh light resistance up to 150.000 lux
TUIO support

Installation of a touch videowall

For one of our customers we installed a multi-touch videowall. The six 70″ displays in portrait mode make it to a total size of 5.4 x 1.5 m. By means of infrared sensors, the six displays can recognize up to 40 simultaneous touch inputs.

A videowall requires a robust, planned substructure. This must provide sufficient support for the desired number of displays, glass holders, protective glasses, touch sensors and a frame to cover the sensors. Depending on the planned design of the videowall, the structure varies from case to case.

In our example, the videowall and the substructure are embedded in a cavity in the wall in order to achieve the smoothest transition possible between the wall and the touch surface.

The displays are fixed by means of retractable display mounts and installed into the wall. Specially designed for videowalls, these displays have extra thin rims. In operation, they form a fine dividing line between the displays.

The displays are all framed by a circumferential glass holder. In front of two displays each, a protective glass is mounted in this holder. The extra glass protects the displays from direct contact and resulting damage.

Our infrared sensors are then mounted onto this same frame. They enable the displays and a PC/Mini PC to recognize touch inputs and respond to them.

A final optional covering of the touch sensors provides additional protection.

Further information

Our interactive videowalls use infrared sensors (IR), which are hidden inside a frame around the touch surface. The sensors scan the surface all around, looking for any interruptions. When the surface is touched with the hand or an object, the sensors detect that point of contact as the exact point of the interruption.

The videowall must be mounted on a flat surface. The surface must not be bent or uneven. If necessary, any existing unevenness must be leveled out by means of a substructure. Otherwise, our infrared sensors cannot establish a complete connection to each other!

To protect the touch-kit from possible damage, we recommend cladding it with an additional frame. This service is to be commissioned by the customer and is not part of our scope of supply.

Contact us now

We will respond as soon as possible

3 + 4 = ?

© Copyright - Interactive Displays GmbH